Faucet with Foot Pedal Accessories Valve Bathroom Basin Faucet Set Laboratory Foot Pedal Faucet Home Sink Water Tap Kit

Basic Info

Packaging & Delivery

Product Description

Laboratory faucets provide running water for rinsing, cleaning, or filling glassware and vessels in laboratories. They are found on lab sinks in schools, hospitals, research facilities, and similar settings. These faucets can be used to install a faucet on a new sink or replace an old faucet on an existing sink.

If you want your lab to produce accurate and confirmable results, you need the right equipment.

Most people focus on heavy technical equipment when they think about items that can influence their results, but in reality, it's the small details that make a researcher's job easier. Choosing the right laboratory faucets and valves might not seem like a big decision, but making the right choice now can save you from problems later.

There isn't a lab anywhere in the world that doesn't need water faucets and valves. Whether it's for experiments or cleaning lab equipment, water plays an essential part in all scientific studies.

Single Faucets

These are the typical faucets that you see in labs everywhere. They have an elongated neck that bends at the top so that the water runs from the nozzle down into a sink. From this basic layout, there are several design features to meet the needs of different lab personnel.

For example, most lab nozzles feature a deck mount with the water handle on the right side, but you can also get it on the left for left-handed technicians. You can also choose to get them with aerators, cold water buttons, and other features to meet your lab's unique needs.

Choosing the length of the neck is an important part of picking the correct single faucet for your lab. Make sure that you leave enough room between the nozzle and bottom of the sink to fit buckets and other containers that you'll fill with water.

Mixing Faucets

These are the faucets with two handles, one for hot water and one for cold. You'll have more control over the temperature of the water you use, but they also come with safety risks. If someone leaves the hot water running and walks away from the faucet, the next person may burn their hands when they try to use it.

These faucets, like single faucets, can also waste water, as people tend to leave them on accidentally or when carrying something from a sink to a table. Even if they only get left on for a few seconds, those wasted gallons add up over time.

With that said, you will have control over water temperature and can customize the faucet with an aerator or serrated nozzle. As with a single faucet, you should take measurements to make sure that you get the right sprout length.

Electronic Faucets

The main benefit of electronic faucets is that you'll have hands-free access to water. Most of the faucets have an internal mixer that keeps the water temperature below 122°F so that you don't burn yourself. These faucets are perfect for sinks around a lab, as they allow workers to wash their hands without having to touch the handles.

Water Valves
Water valves allow you to control the amount and pressure of water. These come in three varieties: straight, angle, and hose bibbs. Labs can fit these valves with control flow cartridges and several nozzles, some of which include aspirators and vacuum breakers. You can also fit them with turrets, which allows you to have two valves on one water source. You can also fit the valves with various handles, some of which have hot and cold buttons on them.

Steam Valves
These valves help to control the pressure and release of steam for your lab. It's important to use valves designed for steam for safety reasons. Incorrect equipment can lead to built-up pressure, accidental release, and burns. You can choose between a straight and angled valve and add on turrets.

Gas Valves
There are three common types of gas valves you can have for your lab: gas needle, gas fine needle, and gas ball valves.
Gas needle valves help you regulate air-flow at lower rates using a small port and a threaded needle-shaped plunger. These valves are hand adjusted to match small proportional movements. They're used when you need to adjust a small amount of gas and are meant for precision.

Ball valves are the most common type of valve in laboratories. A ball sits in the bore and either allows gas to flow or blocks it. These valves are for general purpose use.

Which Valves Do You Need?

Depending on the type of lab you run, you may need some of each type of valve and faucet.

University labs need each type of valve due to the nature of research and experimentation that occurs. Several students and researchers work in the same space on different projects, and the research changes every few years as new people get cycled in and out of the lab. Ordering everything you need in advance will stop you from having to postpone research while waiting on equipment.

For specialized labs, what you'll need depends on the type of research conducted. Company labs tend to work with particular substances, so you should have a good idea of your needs. The turnover rate and change in focus that you see in universities won't occur as quickly, giving you time to get what you need as you need it.

For both labs, you should have multiple water faucets and valves. Water is a necessity in any research, and is a safety requirement as well. Place multiple sinks around your lab with at least one electronic faucet. If someone works with volatile substances, you don't want them touching handles, as others that might have a sensitivity to that substance will then come in contact with it.

Safety When Working With Laboratory Faucets And Valves

The most important safety rule is that if someone isn't working with a faucet and valve, turn it off immediately. Never allow valves, especially those that control gas and steam, to stay on longer than necessary. Some gasses could cause health issues if released into the air. You should never assume that your safety hoods will keep the gasses under control. Steam, on the other hand, poses risks as it can burn anyone that comes across an unclosed valve.

You should also have safety checks to make sure your valves work properly. You should test them at least once a week to make sure they only let out the amount of liquid that you want. If they show signs of wear and tear, decay, or inaccuracies, replace them immediately.

Keep your valves and faucets clear of anything that could damage them. Impacts that cause damage to a valve could lead to a gas or steam leak, which can cause health risks. You should use acoustic and specialized sensors to test for leaks. Valve leakage increases with time due to the erosion of the valve's sealing, so any leak detected, no matter how small, should cause you to shut the valve down and replace it.

You should also make sure that only authorized people use the valves in your lab. Post signs next to each valve that states what the valve controls and possible safety risks. You should also have information about every type of substance you use in your lab organized and accessible to everyone that works with the valves. This step will help anyone that comes into contact with gasses and steam.

You should have a proper ventilation system in all labs to limit the gas and steam build-up if any valves fail. You should also only buy valves from trusted vendors. Buying discounted valves could lead to problems, as these valves are often either repurposed or re-used. Only buy new valves from a company that specializes in producing high-quality fixtures and equipment.